HP Printer Error Codes List and Solutions

And speaking of troubles, printers are important devices for both office and home use but they tend to be a nuisance sometimes. It is good to note that HP printers are clever enough to provide error codes if something is wrong with a particular feature. If you know what the cause of the error code is, you have already won half the battle. In this all-inclusive guide, we will look at HP printer error codes list and solutions that would hold your hand when you face such printer issues.

Also Go through:

• How to Connect Epson L385 Printer to Wi-Fi
• How Much Does It Cost to Repair a Printer?
• How to Connect Brother Printer to Wi-Fi

We will cover the Following queries:

• HP printer error troubleshooting
• Common HP printer issues
• HP printer problems and fixes
• HP error codes guide
• Resolve HP printer errors
• Printer error solutions
• Fixing HP printer errors

Let’s dive in.

What Are HP Printer Error Codes?

HP printers show an error code when something is wrong with them or any of their components. Aqueous codes enable users to have a basic understanding of the issues, enabling them to address basic issues such as a paper jam or spotting an issue with a component or firmware. In fact, knowing them goes a long way in knowing how to respond quickly whenever a need arises or even avoid visiting a printer technician.

Common HP Printer Error Codes

1. Error 02 – Warming Up Error

HP printers display this code when they are unable to warm up and is known as Error 02. Most of the time, the cause is either a bad connection or some failing components.

Solution:

• If this error code displays, check if the power cable is connected properly.
• First switch off the printer, wait for half a minute and switch it back on.
• Then update the formware or any software available on the printer.

2. Error 11 – Paper Out

Error code 11 is exhibited when there is no paper in the paper tray but paper actually is placed there.

Solution:

• Additional paper has to be fed into the tray.
• The correct paper alignement must be checked.
• There must be no barriers on the internal side of the tray.

3. Error 13 – Paper Jam

Another one of the common problems, Error code 13 refers to the paper not being able to pass through the printer entirely, also known as a paper jam.

Solution:

• Open the printer and extract the pages that were accustomed to get stuck in the paper-in advance mechanism.
• Lastly, make sure that the paper which is put in the tray is not in a crooked position.

Advanced HP Printer Error Codes

4. Error 10 – Supplies Memory Error

When one tries to read memories from any installed toner or cartridge, this is Error Code 10.

Solution:

• Detach and place the toner once again.
• So, what can be read from this text- check if the toner contacts are clean.
• If toners do not work after being refilled, they should be discarded.

5. Error 14 – No Toner Cartridge Installed

This is the type of error which is exhibited when a toner cartridge is for some reason not noticed by the printer.

Solution:

• Ensure the toner cartridge is correctly installed.
• Remove any protective tape on new cartridges.

6. Error 20 – Memory Overflow

Error 20 is often associated with the printer’s memory being full when the print job is too complex.

Solution:

• Decrease the size or complexity of the document.
• Split the print run into smaller pieces.
• Add memory to the printer if it is adjustable.

HP Printer Wireless Connection Errors

7. Error 30 – Wireless Connection Lost

Error 30 displays when HP printer cannot sustain a wireless connection.

Solution:

• To resolve this, restart your Wi-Fi router along with the printer.
• Check if the printer is within the Wi-Fi range.
• Depending on the model, you may need to reconnect it to the network with HP Smart app.

8. Error 50.4 – Power Supply Error

Often, this power supply situation is caused by use of a UPS or surge protector, indicating issue with power supply.

Solution:

• In this case, it is advised to plug your printer into the wall directly.
• If you restart the printer, you should note if the error goes away.

Fixing Less Common HP Printer Errors

9. Error 52 – Scanner Malfunction

The error suggests that scanner motor has issues.

Solution:

• Try and reset the printer.
• Connect the scanner cable appropriately.

10. Error 57 – Fan Error

Fan error, as name suggests, indicates the fan on the printer altogether failed.

Solution:

• To combat this problem, ensure there is adequate ventilation around the printer area.
• Most of the time, it is enough to just restart the printer.
• If the problem continues, reach out to HP support.

11. Error 60 – Paper Lift Error

This happens when the elevator motor for the paper tray is not functioning properly.

Solution:

• The paper tray should not be overloaded.
• Adjust the paper position and verify that it is properly secured in the tray.

Firmware-Related HP Printer Errors

12. Error 79 – Firmware Error

Hardware or firmware issues are the causes of Error 79.

Solution:

• Switch off the printer, disconnect the power cord, and wait for 30 seconds before switching it on again.
• Go to the HP site and perform a firmware update.
• If the error continues, refer to an expert.

13. Error 49 – Communication Error

This error indicates a failure of communication between the printer and the printing device.

Solution:

• Turn off the printer and the device that is sending the print job.
• Make sure that all connections are made (USB, Ethernet, etc.).
• Reinstall if needed the printer driver.

HP Printer Maintenance Tips to Avoid Errors

As the saying goes, ’prevention is better than cure’. Here are some preventive measures to make your HP printer run smoothly without getting any of these HP printer error codes:

Regular Cleaning

Dust can accumulate inside your printer and lead to paper jams or other mechanical issues. Regular cleaning helps prevent this.

Firmware Updates

Make sure you update the firmware of your printer on a regular basis. HP has the habit of releasing updates to its printers at quite regular intervals with an aim of correcting glitches and ensuring that performance is optimal.

Use Genuine HP Supplies

Sometimes there is no need of an error message from HP printers and things just do not work. This is particularly true for non-HP cartridges. Therefore using genuine HP supplies is recommended because it minimizes the likelihood of problems arising.

 

Troubleshooting Tools and HP Support

Similar to many people who may have similar experiences in the future you may also encounter some errors after attempting the solutions listed above, for these reasons, HP has developed all sorts of error fixing tools which they have made available to the public via their official website. You may desire to check the official HP Support page to access the manual or simply engage their assistance desk for help.

Conclusion

 

To some extent, knowing the digital mapping of your hp printer while having an understanding of the hP error codes list is enough to make any hp printer troubleshooting a walk in the park. Ordering supplies or services should not be a problem even if you know the joy of the common paper jam fortification rubber. However the conclusion that can be made from the content of this article is that owners of different generations of printers are usually able to deal with the majority of their problems by themselves and printers of nearly every generation provide optimal solutions. Regular cleaning, hP printers updating and usage of genuine spares takes out so many common reconstructive procedures out of the equation. You will find this guide helpful in preparing for what is about to happen.

---

Frequently Asked Questions